Find the optimal positions for your speakers and listening seat. Physics-based optimization for the flattest frequency response.
Free room analysis — no account needed
Even expensive speakers sound mediocre in the wrong position. Low-frequency performance is dominated by how the speaker couples to room modes — moving a speaker a few feet can change bass response by 10–15 dB at some frequencies. That's a bigger difference than upgrading from a $500 speaker to a $5,000 one. Optimizing placement is the single highest-impact thing you can do for sound quality.
A common guideline places speakers at 1/3 of the room length from the front wall and the listener at 1/3 from the back wall. This avoids the worst axial mode peaks but doesn't account for tangential modes, room proportions, or subwoofer interaction. Atuund goes beyond rules of thumb by computing the actual frequency response at thousands of possible positions and finding the combination with the lowest variance.
Speaker placement involves two goals that sometimes conflict: stereo imaging (which benefits from symmetric placement and proper toe-in angles) and bass response (which depends on distance to room boundaries). Atuund optimizes for bass flatness while maintaining stereo symmetry, giving you the best of both worlds.
It depends on your room dimensions and modes. The common advice of "at least 2–3 feet" is a rough starting point, but the optimal distance varies by room. Atuund computes the exact positions that minimize bass peaks and nulls for your specific room geometry.
Generally no — the back wall is a pressure maximum for many axial modes, which causes boomy, uneven bass. Moving forward into the room usually helps. Atuund's optimizer finds the listening position that balances flat frequency response with practical room use.
Placement primarily affects frequencies below 200–300 Hz where room modes dominate. High frequencies are more affected by speaker design, toe-in angle, and first reflections from nearby surfaces. Atuund focuses on the bass region where placement matters most.
Atuund uses finite element method (FEM) modal analysis to model room acoustics. Built for hi-fi enthusiasts, home theater builders, and anyone who wants better sound from their speakers.